Download materials
Technical specification Manual 3D drawing

Automation

Multifunction Analog Timer Relay DTM

Description

The DTM Multifunction Analog Timer is a DIN rail timing relay that combines 10 operating modes and 8 time ranges, from 0.1s to 10 days, in a single device. With multi-voltage power supply from 12 to 240VAC/VDC, it replaces several specific timer models, which simplifies specification and reduces inventory. Settings are made with selectors on the front panel, and LEDs indicate the power-on status and the output state. Available in two versions, DTM1-W with 1 changeover relay output (SPDT) and DTM2-W with 2 changeover relay outputs (DPDT), it complies with the IEC61812-1 and IEC61010-1 standards, has 16A contacts in AC1 and IP44 protection degree on the front panel.

  • 10 operating modes
  • 8 time ranges, from 0.1s to 10 days
  • Multi-voltage from 12 to 240VAC/VDC
  • Output with 1 or 2 changeover relays

Select the options below

CÓD: DTM1-W

General specifications
ModelDTK1-W
StandardsIEC/EN61812-1, IEC/EN60947-5-1
FunctionA, B, E, F
Power terminalsA1 - A2
Power supply 12 ~ 240VDC/VAC / VDC / VAC 50/60Hz
Supply tolerance-15% / +10%
ConsumptionCA / AC: 0.09 ~ 3VA / CC / DC: 0.05 ~ 1.7W
Power-on indicationGreen LED
Time adjustment0.1s ~ 99h, ON and OFF
Adjustment error10% (mechanical adjustment)
Reset timemax. 200ms
Temperature coefficient0.05% / °C, ta= 20 °C
Output1 changeover (SPDT) relay
Contact rating16A - AC1
Switching voltage (max.)250VAC / 24VDC / 250VAC / 24VDC
Output indicationRed LED
Mechanical life10 x 10⁶ operations
Electrical life (AC1)10⁵ operations
Operating temperature-20 ~ 55 °C
Storage temperature-35 ~ 75 °C
Wire applicable(mm²)1x2.5 or 2x1.5 - Applicable cable
Applicable cable1x2.5 (AWG 12)
MountingDIN rail mounting
Degree of protectionIP40 (frontal) IP20 (terminals)
Overvoltage categoryIII
Pollution degree2
Dimensions90 x 18 x 64mm